NFG353A132,供應ASCO比列調節電磁閥[產品打印頁面]

NFG353A132,供應ASCO比列調節電磁閥
Key locking device attached to adjustment screw, supplied installed; code: 662598
ACCESSORIES (other accessories: see pages 21 - 22)
• G1 silencer, code: 34600411
• Key locking device supplied separately, code: 34303050
• Blanking kit for adjustment screw designed to receive a key locking device, code: 34307021
• Blanking plate for adjustment screw not designed to receive a key locking device, code: 34307022
• By-pass module, see page 16
ASCO比列調節電磁閥宜水平安裝。水平安裝時，閥蓋宜向上。消防給水系統的減壓閥閥后應有排水設施。自動噴水滅火系統的需減壓時，減壓閥應設置在報警閥前（沿水流方向），與單個報警閥配套設置的減壓閥，可不設備用減壓閥；與多個報警閥配套設置的減壓閥，應設備廠用減壓閥。用于熱水供應工程的減壓閥，應采用熱水型減壓閥。
采用干管干管循環方式（半循環方式）的熱水供應工程，減壓閥設置要求應與冷水工程相同；采用立管循環方式（全循環方式）的熱水供應工程，減壓閥設置應防止熱水循環的破壞，各分區回水管在匯合點壓力應平衡。
電動遙控閥就是水壓控制的閥門，水力控制閥由一個主閥及其附設的導管﹑導閥﹑針閥﹑球閥和壓力表等組成。根據使用目的﹑功能及場所的不同可演變成遙控浮球閥﹑減壓閥﹑緩閉止回閥﹑流量控制閥﹑泄壓閥﹑水力電動控制閥、水泵控制閥等。
SYSTEM PRESSURISATION AND DEPRESSURISATION CURVES
• WITH A SOLENOID/AIR CONTROLLED SOFT-START DEVICE
These times correspond to a supply
pressure (Pa) of 6.3 bar, a downstream
system capacity of 10 and 20litres and
a pressure of 90% Pa.
Unlike the automatic soft-start version, this version only authorises full fl ow on receiving a permanent electrical signal.
The adjustment range for the pressurisation time lies between curves (1) and (2).
Filling and venting times (in seconds):
T1 (with screw loosened by 10 turns) 9,5 15
T2 (with screw loosened by 1 turn) 44 68

NFG353A132,供應ASCO比列調節電磁閥

 

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!