德國費斯托雙手控制塊，ZSB-1/8-B
額定尺寸 4 mm
驅動類型 氣動
裝配位置 任意
安全功能 雙手操作
安全性能等級 (SIL) 雙手操作/SIL 1
性能等級 (PL) 雙手操作/類型1, PLc
工作壓力 4 ... 8 bar
標準額定流量 50 l/min
認證簽發部門 IFA 1201046
工作介質 壓縮空氣符合ISO8573-1:2010 [7:4:4]
關于工作和先導介質的說明 可以使用經過潤滑的壓縮空氣 (一旦使用后要求一直使用經過潤滑的壓縮空氣)
耐腐蝕等級 CRC 1
環境溫度 0 ... 60 °C
耐沖擊性 震動測試 SG2 和 FN/EN
安裝類型 可選 帶通孔
具有內（陰）螺紋
氣動連接, 氣口 2 G1/8
氣動連接, 氣口 3 G1/8
材料備注 符合 RoHS
蓋子的材料信息 壓鑄鋁
密封件的材料信息 NBR
外殼的材料信息 鍛造鋁合金 陽極氧化處理
Key features
Function
This pneumatic control block for twohand
start ZSB is used where a manually
started operation, such as the
triggering of compressed air cylinders,
would otherwise involve danger for
a machine operator, or with other
devices where machine operators
have to have both hands clear of a
danger zone when starting a machine.
The ZSB will only switch if pressure is
applied simultaneously via 3/2-way
pushbutton valves to the two inlet
ports 11 and 12 of the ZSB, i.e. within
max. 0.5 seconds, and if there is an
output signal at port 2. If both pushbutton
valves are activated, outlet
port 2 is pressurised.
Releasing one or both pushbutton
valves interrupts the flow immediately
and the outlet port 2 becomes unpressurised.
The system vents from 2 to 3.
德國費斯托雙手控制塊，ZSB-1/8-B
Safety data
Lift Two-hand operation in accordance with EN ISO 12100
Performance Level (PL) Two-hand operation: Category 1, PL c according to EN ISO 13849-1
Safety Integrity Level (SIL) Two-hand operation: SIL 1 according to IEC 61508 (can be used in SIL 1 controllers according to IEC 62061)
Reliable component Yes
Standard approval Type III A according to EN 574
Certificate issuing authority IFA 1201046
CE marking
(see declaration of conformity)
To EU Machinery Directive
Shock resistance Shock test with severity level 2 according to FN 942017-5 and EN 60068-2-27
General technical data
Pneumatic connection Gx
Nominal size [mm] 4
Actuation type Pneumatic
Design Poppet valve with spring return
Type of mounting Via through-hole
Via female thread
Mounting position Any
Standard nominal flow rate [l/min] 50
Product weight [g] 420
Operating and environmental conditions
Operating pressure [bar] 4 … 8
Operating medium Compressed air in accordance with ISO 8573-1:2010 [7:4:4]
Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required)
Ambient temperature [°C] 0 … +60
Corrosion resistance class CRC1) 1
CE mark (see declaration of conformity) To EU Machinery Directive
1) CRC1: Corrosion resistance class to Festo standard 940 070
Components with light corrosion exposure. Protection for transport and storage. Components without significant decorative function or surface, e.g. installed out of sight internally or behind covers.
德國費斯托雙手控制塊，ZSB-1/8-B
