諾冠溢流型氣控減壓閥，R18-C00-RNXG[產品打印頁面]

諾冠溢流型氣控減壓閥，R18-C00-RNXG

特點
能夠安裝在氣動系統的任意位置–可以安裝在便利的位置
可與普通型和反饋型先導減壓閥配合使用
反饋型先導減壓閥對下游壓力變化很感，可自動調節先導減壓閥的出口壓力

介質: 壓縮空氣
接口尺寸: G2
驅動: 溢流
工作溫度: -18.0 ... 80.0 °C
溢流/非溢流: 溢流
壓力表接口: G1/4
流量: 950 dm3/s
熱塑彈性體: 丁腈橡膠
主體: 鋁合金
閥蓋: 鋁合金

以下可配套附件，需另行訂購
BSP 螺紋接頭
型號: 150232818
特點
光亮鍍鎳
耐腐蝕
設計緊湊
必要出配有密封墊圈
介質: 壓縮空氣
工作壓力: -0.9 ... 18.0 bar
工作溫度: -18.0 ... 70.0 °C
BSPT: R1/4
BSPP內螺紋: G1/8
BSPT外螺紋: R1/4
密封墊圈: 紫銅;Delrin®
配管類型: 尼龍 11或者12;聚氨酯 85、95或者98 計示硬度
形狀: 直頭
螺紋: G1/8

quietaire重載消音器Ma和Mb系列
型號: MB006B
特點
降低氣動設備的噪音
防止排氣時發生危險
耐腐蝕
大流量、低背壓
黃銅篩網，鋁制外殼
改良的流量、長壽命和可清潔濾芯
防止金屬碎片、鐵屑、灰塵和其他污物進入敞開的排氣口
介質: 壓縮空氣，過濾、潤滑或者未潤滑或者中性液體
接口尺寸: R3/4
工作壓力: 20.0 bar
工作壓力: -1.0 ... 20.0 bar
工作溫度: -20.0 ... 80.0 °C
流量: 21421 l/min
主體: 鋁合金
BSPT外螺紋: R3/4
外螺紋: R3/4
螺紋: R3/4

The R18 with the conventional integral pilot provides
good pressure regulation, rapid response to
changing flow demands, and excellent stability.
The R18 with the feedback integral pilot provides
superior pressure regulation under changing flow
demands where changes in flow demand are not
sudden or cyclic.
Balanced valve minimises effect of changes in inlet
pressure on outlet pressure
l Constant bleed feature in pilot regulator provides
quick response and minimum dead-band
Exceptionally high relief flow
Full flow gauge ports
Low torque, non-rising adjusting knob
Integral locking device on knob adjustment

Technical Data
Fluid: Compressed air
Inlet pressure range: 0,7 bar (10 psig) minimum to 31 bar
(450 psig) maximum
Operating temperature: -18° to +80°C (0° to +175°F)
Air supply must be dry enough to avoid ice formation at temperatures below +2°C
(+35°F).
Typical flow with 0,7 bar (100 psig) inlet pressure, 6,3 bar (90 psig)
set pressure, and a droop of 1 bar (15 psig) from set:
944 dm3/s (2 000 scfm)
Gauge ports:
1/4" PTF with PTF main ports
G1/4 with ISO G main ports
R1/4 with ISO Rc main ports
Exhaust port:
3/4" PTF with PTF main ports
G3/4 with ISO G main ports
R3/4 with ISO Rc main ports
Maximum bleed rate: 0,12 dm3/s (0.25 scfm ) at 3,5 bar (50 psig)
outlet pressure.
Materials:
Body: Aluminium
Bonnet: Aluminium
Bottom Plug: Aluminium
Valve:
Integral Pilot Regulator: Teflon
Pilot Operated Regulator: Aluminium
Elastomers: Nitrile

諾冠溢流型氣控減壓閥，R18-C00-RNXG

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!