SMC薄型液壓缸，CHKGB40-15[產品打印頁面]

SMC薄型液壓缸，CHKGB40-15

符合JIS標準薄型液壓缸   CHK□/CHDK□
 系列/CAD 公稱壓力 (MPa) 缸體材質 動作方式 缸徑(mm)
CHKD  10 鋁 單桿雙作用 20,25,32,40,50,63,80,100
CHKG  16 鋁 單桿雙作用 20,25,32,40,50,63,80,100
特長 鋁質缸體，輕、緊湊。
可安裝磁性開關。
帶或不帶磁性開關，缸體長度方向尺寸一樣。
符合JIS標準 (CHKD系列)
帶磁性開關 (CHDK系列：CHDKD、CHDKG)

1 。使用內六角螺釘（ JISB1176 ，氣缸安裝強度等級10.9或更高版本） 。
2 。因?yàn)橐粋€(gè)橫向負荷（偏心載荷）不能應用活塞桿，在建立裝配架該側向載荷將不會被應用到這樣一種方式活塞桿。
3 。確保該桿的聯鎖長度端螺紋（男或女螺紋）和安裝材料是至少80％的螺紋直徑。
4 。當操作一個氣缸的**次時，一定釋放空氣氣缸和配管的內部。
當空氣釋放完畢，操作筒在減壓下，再逐漸增加它到正常工作壓力。
5 。自系列CH 2 KDB不具有空氣釋放塞，來自其他組件釋放空氣（例如，從管道等）為好。
6 。不要使用兩個汽缸面對彼此水平或垂直于這樣一種方式，其活塞棒打擊對方。
7 。當在氣缸蓋側包含液壓流體或者是在通常的加壓條件下，所施加的負載絕不允許罷工的活塞桿端。避免這樣的應用程序。
8 。當帶安裝固定在氣缸體螺栓，擰緊使用表中扭矩在左邊的引導。

1. Use hexagon socket head cap screws (JISB1176,
strength class 10.9 or higher) for cylinder mounting.
2. Since a lateral load (eccentric load) cannot be applied
to the piston rod, build the mounting jig in
such a way that a lateral load will not be applied to
the piston rod.
3. Make sure that the interlocking length of the rod
end thread (male or female thread) and the mounting
material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time, be sure
to release the air inside the cylinder and the piping.
When the air release is complete, operate the cylinder
at reduced pressure, then gradually increase it
to the normal operating pressure.
5. Since Series CH
KDB does not have an air release
plug, release air from other components (e.g. from
piping, etc.) as well.
6. Do not use two cylinders facing one another horizontally
or vertically in such a way that their piston
rods strike each other.
7. When the cylinder head side contains hydraulic fluid
or is in a normally pressurized condition, the applied
load must not be allowed to strike the piston
rod end. Avoid such applications.
8. When mounting the cylinder body with mounting
bolts, use tightening torques in the table at left as a guide.

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!