德國賀德克傳感器￥熱賣HYDAC傳感器[產品打印頁面]

德國賀德克傳感器￥熱賣HYDAC傳感器

TestPoint is a small measurement coupling with check valve which can remain
permanently in the hydraulic system. The TestPoint can be used to check the
pressure while the system is running, to ventilate the system or to take a sample of the medium.
In addition, there are also special measurement couplings with check valve
which permit not only pressure measurement but also a temperature measurement of the medium.
Advantages:
Dynamic actuation force up to 25 kN
Stroke velocity up to 1 m/s
Stroke up to 2,000 mm
Duty cycle, model-dependent, up to 100 %
Selection of various sensors possible
Depending on the application, technical data
may vary
70 % saving in energy
Reduces tank volume by 50%
Robust switching valves only are used
Reduces noise by more than 10 dBA
Drive unit for two hydraulic motors
used in log crushing:
2 x 30 kW speed controlled
Qmax = 150 l/min per unit
Speed control: 0-60 rpm
Coupling and uncoupling the TestPoint without system shutdown
Pressure, pressure peak measurements with pressure sensors
Ventilation and sample-taking while system is running
clean handling through leakage-free coupling and uncoupling
for solder-free pipe coupling in accordance with DIN 2353
Opposite side TestPoint-1620 connection (M16x2)
Thread  Pmax  Connection 
M 16x2  63 MPa  both sides series 1620 
 

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!