主營產品：閥門、氣動元件、儀器儀表、電子元器件
產品[

DG5V-10-W-2A-E-M-W-H-10,威格士軸配流馬達[產品打印頁面]

]資料
如果您對該產品感興趣的話,可以
產品名稱: DG5V-10-W-2A-E-M-W-H-10,威格士軸配流馬達
產品型號: DG5V-10-W-2A-E-M-W-H-10
產品展商: 威格士VICKERS
簡單介紹
DG5V-10-W-2A-E-M-W-H-10,威格士軸配流馬達 伺服閥, SE3-02-220-002-10, SE3-02-40 5-002-10 零件和維修 English I-3054-S SA4 系列, 兩級伺服閥, SA4-03---1 , SA4-06---1 零件和維修 English I-3060-S 電子/放大器./電源,放大器, 電源補給,

DG5V-10-W-2A-E-M-W-H-10,威格士軸配流馬達的詳細介紹

DG5V-10-W-2A-E-M-W-H-10,威格士軸配流馬達
This manual provides service information for Eaton
Models 33 thru 64 Variable Pumps. Step by step
instructions for the complete disassembly, inspecti
on and reassembly of the pump are given. The following
recommendations should be followed to insure successful repairs:
· Most repairs require the removal of the pump from the vehicle.
· Clean the port areas thoroughly before disconnecting the hydraulic lines.
· Plug the pump ports and cover the open hydraulic lines immediately after they’re disconnected.
· Drain the oil and clean the exterior of the pump before making repairs.
· Wash all metal parts in clean solvent.
· Use compressed air to dry the parts. Do not wipe them dry with paper towels or cloth; Lint in a
· The compressed air should be filtered and moisture free.
· Always use new seals when reassembling hydraulic pumps.
· For replacement parts and ordering information refer to parts list 6-608.
· Lubricate the new rubber seals with a petroleum jelly like Vaseline before installation.
· Torque all bolts over gasketed joints, then repeat the torquing sequence to make-up for gasket
14 Pull the two check valves from the end cover; Hook
the short end of the pulling tool in one of the check valve
If the pulling tool is unavailable remove each check valve
by inserting a screw driver into the output port and prying
up on the bottom of the check valve.
Note: A detailed drawing of the check valve pulling tool
15 Remove the o-rings and back-up rings from the
11 Reposition the pump so the shaft is vertical and the
charge pump is on top. Stand the pump on two blocks
of wood as shown in figure 3.
12 Remove the four bolts that hold the charge pump to
the end cover, see figure 3. The two remaining bolts
hold the charge pump together.
Note: Information on charge pump repair is given in
13 Lift the charge pump from the end cover. Remove
the gasket and two dowel pins.
Note: Keep track of the dowel pins, see figures 3, 5,
and 8. There is a total of nine dowel pins in the pump. It
is a good idea to put them in a small box so they don’t
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!


名稱：上海乾拓貿易有限公司
上海地址：上海市嘉定區嘉涌路99弄6號713室

聯系人：羅丹
QQ：2880626082
直線電話：021-39526590
聯系人：羅小姐 18917038407（同微信）
郵箱：18917038407@163.com


聯系人;沈雪
企業QQ:2880626081
手機；18918574312（微信） 
電話；021-69000975
郵箱:18918574312@163.com


聯系人：章瑩玲
企業QQ:2880626085
手機；18918572467（微信） 
電話；021-69000973
郵箱:18918572467@163.com


聯系人：王亞波
QQ:2880626088
021-39529839-8012
手機：17321056802（同微信）
郵箱:17321056802@163.com

上海乾拓貿易有限公司    地址：上海嘉定嘉涌路99弄6號713    郵編：
聯系人：單先生    電話：021-69000975   手機號碼：18918574312    傳真：021-39947181
滬ICP備09006758號-2  
 

滬公網安備 31011402005013號
點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息