德國力士樂軸向柱塞泵,BOSCH軸向柱塞泵效果圖[產品打印頁面]

德國力士樂軸向柱塞泵,BOSCH軸向柱塞泵效果圖
Robust pump with long service life
Very high total efficiency
The values in the table are theoretical values,
 without consideration of efficiencies and tolerances. The values are rounded.
Exceeding the maximum or falling below the minimum permissible values can lead to a loss of function,
Finer filtration improves the cleanliness class of the hydraulic fluid; thus, the life cycle of the axial piston unit increases.
At least the cleanliness class 20/18/15 according to ISO 4406 is to be complied with.
With hydraulic fluid temperatures above 90 °C, at least cleanliness class 19/17/14 according to ISO 4406 is necessary.
 a reduction in operational service life or total destruction of the axial piston unit.
Other permissible limit values, such as speed variation,
reduced angular acceleration as a function of
the frequency and the permissible angular acceleration at start
(lower than the maximum angular acceleration) can be found in data sheet 90261.
High power density
Large variety of available nominal sizes allows exact adjustment to the application
Optional with long-life bearings for the nominal sizes 250 to 1000
Bent-axis design
The axial piston unit is designed for operation with mineral oil HLP according to DIN 51524.
Application instructions and requirements for hydraulic fluids should be taken from the following data sheets before the start of project planning:
90220: Hydraulic fluids based on mineral oils and related hydrocarbons
90221: Environmentally acceptable hydraulic fluids
90222: Fire-resistant, water-free hydraulic fluids (HFDR, HFDU)
90223: Fire-resistan, water-containing hydraulic fluids (HFAE, HFAS, HFB, HFC)
90225: Restricted technical data for operation with fire-resistant hydraulic fluids

德國力士樂軸向柱塞泵,BOSCH軸向柱塞泵效果圖

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!